 |
The Athena represents the best of performance,
features, functionality and modern styling available in water ionization
technology today - all backed by the dependability and certainty of Emco Tech,
the world leader in ionization.
Why Ionize?
You
want two things from an ionizer: clean and healthy water. To
understand the technological advancements you'll find in the Athena, which
create its outstanding performance, you should read the basics of how an
ionizer works (click to page The Basics of pH and ORP) . Other
considerations in performance are durability, or how long the unit will
perform, and functionality.
Research states that the ideal level for
drinking alkaline water is between pH8.5 pH9.5 with an ORP of -250mv. It
is unimportant if an ionizer creates big -ORP numbers at really high levels of
pH. For most people, water over a pH10 begins to acquire an unpleasant taste
due to the heavy concentration of minerals. What is important is drinking water
at the mildly alkaline levels of pH8.5 pH9.5 with good -ORP.
|
| Of course the Athena will create the big ORP
numbers at the higher pH ranges, but it is designed to give you the
best ORP at the lower levels of pH. These are the levels that you will actually
enjoy drinking. That is where the bang for your buck is. There is no need for
ionized water to taste bad and be the cod liver oil of this
generation! |
|
PERFORMANCE:
Filtration
The Athena is the only Emco Tech ionizer that offers on-board
dual filtration capability. It cleans your water to be 99.9% contaminant free.
The Athena incorporates a pre-filter and the revolutionary Biostone Filtration
System. The pre-filter makes the Athena the only ionizer that gives you ability
to quickly and easily add a specialty cartridge to your system
onboard ! No filter housings to hook up or difficult/extra connections
to make. If you have a Reverse Osmosis (RO) system or a unique filtration
requirement such as needing to remove lead or arsenic, you can order and
install these specialty cartridges directly into your ionizer.
The Athena
offers you the absolute zenith of cutting-edge electrode technology. It employs
the new mesh electrode which effectively increases surface area.
When a cross section of an electrode is examined at 700 times magnification,
you can see that the electrodes are now covered in a super fine
mesh with very distinct high points and valleys. They are electro-plated
platinum, providing the highest level of conductivity and durability. The
cutting edge design and proven durability of electro-plated platinum electrodes
ensures you get the best Oxidative Reduction Potential (ORP) alteration year in
and year out.
The new mesh design on the plates
also allows for the Athena's compact size. Do not be fooled by other
manufacturers who claim that a large plate size is vital to ionization.
Effective conductivity is the key. These manufacturers must claim this because
their inferior plates need to be larger to get the same amount of
conductivity that ours do. Rest assured you get the absolute best combination
of time-tested, proven materials and the benefits of Emco Tech's cutting edge
research and development. This is the technological advantage of the
Athena.
Durability
An ionizer is an
investment, and of course you want your investment to last. The electrodes are
the crucial operating component in your ionizer. All other units on the market
clean themselves using a simplistic reverse polarity system
which not only allows some scale buildup, but also prevents you from using your
machine during its cleaning cycle. The Athena offers the patented new DARC
(Double Automatic Reverse Cleaning) system. It completely eliminates the
mineral scaling from collecting on the electrodes, ensuring you can enjoy many
long years of healthy water. The DARC system cleans as you ionize
so you never have to wait for a cleaning cycle to complete.
You
will also want your ionizer company to be around to take care of your needs
many years after you actually make the purchase. This key value point cannot be
emphasized enough. In the last two years alone, approximately 8 new
manufacturers have come and gone in the market, and many more companies have
fallen short attempting to sell their wares. With IonWays and Emco Tech, you
buy with the absolute certainty that your company will be around to support you
long after the other inferior companies have left their
customers high and dry without support. Their combined 35 plus
years of experience and track record is
unmatched
...period.
Functionality
The Athena offers a flow control valve that allows you to
fine tune its performance by giving you complete functional control of the
water pressure moving through your ionizer. There are no gimmicks or additional
circuitry, just the time tested advantages of true flow control, which also
provides the possibility of alternate installation options. The Athena is one
of the only ionizers that can be installed three (3) different ways : 1) At
your sink with a diverter from the tap, 2) At your sink plumbed directly to
your cold water line. There is no diverter and you can operate the
Athena while running the hot water out of your tap, and 3) Undersink completely
out of sight with a small dedicated faucet (optional undersink kit
required).
FEATURES:
Performance Features :
Mesh
Plate Electrodes Five of the most advanced mesh platinum-titanium
electrodes in the world ~ backed by Emco Tech's reputation.
DARC Cleaning System Will completely eliminate
mineral scaling from the ever-important electrodes increasing the life
of your ionizer. It also means you never have to wait for a cleaning cycle to
finish before you get another glass of delicious ionized
water.
Biostone Filter The enhanced performance and
functionality of a dual filtration system (2 filters) which includes the
revolutionary and patented 9-stage Biostone filtration
system.
MICOM Electronics The MICOM control panel
optimizes the pH and ORP of your water and helps keeps your ionizer in top
working condition. A new indicator light alerts you if service is needed on
your ionizer.
Flow Control The Athena has a flow
control valve that allows you to fine tune the performance and gives you true
functional control of the water pressure through your ionizer.
LCD Flow Rate Indicator This beautiful color
Liquid Crystal (LCD) Displays flickers faster or slower to indicate the rate of
water flow through your Athena.
Calcium Port This
port allows you to add extra calcium to your ionizer. It is important to note
that the Athena is a very strong ionizing unit and will not require the use of
extra calcium in most areas of the country. Some areas however have soft water
or water that is low in naturally-occurring calcium and other dissolved
minerals. This feature is intended to boost ionization performance in those
areas when necessary.
PROTECTIVE FEATURES
Low Pressure
Alarm Not enough water flow can damage any ionizer. Emco Tech has
built in an LCD alarm that will illuminate when there is not enough water
pressure into your Athena to operate it safely. This feature safeguards the
water cell and protects your investment.
Temperature Shut
Down The Athena employs a thermal switch in the water cell to shut
down the ionization process if the temperature in the cell gets too hot. This
small but valuable feature gives you peace of mind.
Electrical
Protection The Athena has a glass tube fuse that will protect the
expensive circuitry in case of power fluctuations or surges.
Hot Water Alarm Hot water can damage your filters.
This LCD alarm will illuminate to safeguard your Athena against
damage.
CONVENIENT USER-FRIENDLY FEATURES
Voice
Confirmation This feature audibly tells you (the machine actually
speaks to you) what type of water you have selected each time you use the
ionizer. The volume is fully adjustable, allowing you to turn it up, down, or
completely off.
Alkaline and Acidic level
indicators The Athena has an LCD indicator which will numerically
display the level of ionization you have selected. It also has LCD image icons
that display the most typical use for any given setting.
Dual
Filter Life Indicator The Athena offers you a way to track the
filter life in each of the two filters. It counts actual filter use it
is not just a timer like on less expensive models.
Change Filter
Reminder An LCD display will flash on the control panel as extra
insurance that you know when to change each filter.
FUNCTIONAL
FEATURES
Methods of Installation The Athena provides you
with the right installation options. It can be installed at your sink with a
diverter from the tap, plumbed directly to your cold water line or undersink
(optional undersink kit required).
pH test kit
This kit contains test tubes, reagent liquid and a pH color chart to help you
understand the ionizer's performance and so that you can be sure you are
drinking the right level of pH.
Installation DVD
The Athena comes with a step by step short, but very informative DVD movie,
showing you everything you will need to know to install, optimize and maintain
the performance of your ionizer.
Fantastic Owners
Manual This beautiful manual was written by the folks at IonWays
it's a great tool!
Installation kit Comes
with everything you will need to perform a standard installation. Unique or
custom installations may require extra parts and or adapters which are
conveniently available at most home improvement or hardware stores.
Athena Water Ionizer Counter Unit $2,095 plus
S&H |
|
|
|
Delphi Water Ionizer Under Sink Unit $2,645 plus
S&H |
|
|
|
| View Cart |
|
|